|
TM Series- Filler caps and breather plugs
Useful to breathe reservoirs and to clean the air sucked into hydraulic-plants tanks, earth moving machines etc. Supplied with pre-cleaning basket, they can be mounted by screws, by soldering or by threaded connections. Some versions are available with pressurized valve and padlock holder.
TECHNICAL DATA:
Flow rates: 0,15÷0,75 m3 / min
Filtering ratio: 10µ - 40µ
------------------------------------------------------------------------------------
LS Series- Optical level indicators
They allowan immediate view of the tank fluid-level. Connected to the external tank side, they are also available with thermometric scale.
TECHNICAL DATA:
bowl: aluminium
bolts and nuts: steel
seals: Buna-N (on request: FKM - Fluoroelastomer).
Max. working pressure: 100 kPa (1 bar)
Working temperature range: -20 °C÷+90 °C
Screw bolt tightening torque: 10 Nm
------------------------------------------------------------------------------------
LME Series- Electrical level indicators
Tank-top mounted, they give an electrical signal when the tank minimum fluid level is reached. They are always supplied with open contacts; to change in close contacts turn upside-down the floating.
TECHNICAL DATA:
Max. electric power: 60 W (max. 250 V a.c. - max 1,5 A).
Brass rod and expanded nylon.
Max. working temperature: 120 °C
Output: MPM connector (type 203) |
|
|
